Make sure your furnace is working before the temperature drops

Posted on September 11, 2011 by admin

The temperature is dropping and that means people will be turning on the heat in their homes soon. But first, it is important to make sure everything is in working order.

Local heating companies said many do not check up on their furnaces throughout the year. Often, they get a flood of calls when it starts to get cold because people don’t realize that their furnaces need maintenance.

Technicians are already visiting some homes, and doing routine upkeep.

One of the most common needs is putting in a new filter. This can be a money-saver down the road.

But, furnace maintenance is not only about saving a few dollars, but also about staying healthy. Heating companies can make sure that there are no carbon monoxide issues in your home before you fire up for the winter.

Heating companies will start to get very busy soon. So they say the earlier you get this done, the better.

turn your thermostat down just one degree and that will save you one percent on your heating bill. That’s diff. For some people to do because they’re in and out of their homes. We would rec. Installation of a programmable thermostat.”

These maintenance checks take about an hour and they can keep more serious problems from developing down the road.

Both Home Comfort Experts and Edward J. White, Inc. are offering special deals for those that call them early.

http://www.wndu.com/

Furnasman

http://Furnasman.com/

Gas Furnace Maintenance Procedures to Prevent Carbon Monoxide Leaks

Posted on December 29, 2010 by admin

An improperly maintained gas furnace is one of the major causes of carbon monoxide leaks. As furnaces get older, they discharge more of this toxic gas, mainly due to the reduced effectiveness of the gas burners and the development of holes and fractures on the furnace, adjoining ventilation shafts and plumbing. Since carbon monoxide is colorless and odorless, these holes can remain undiscovered and become the cause of serious health hazards.

This is the primary reason for doing gas furnace maintenance regularly. Dust and soot must me removed and the moving parts checked at least once every year as per BBB recommendation, to assure they are in proper mechanical condition.

Carbon dioxide is a noxious gas produced as a waste product of unfinished incineration of natural gas and other petroleum based products. Large amount of leak can be fatal and small leaks that remain undetected for a longtime can cause flu like symptoms like headache, dizziness and shortness of breath.

Always include the motor and the blower in the clean up work when calling for the services of a technician. Motors can overheat when the cooling vents are clogged with debris. Dirt can also block the free passage of air when the blower fans are dirty. This can cause damage to the gas furnace or cause the release of deadly carbon monoxide fumes.

The BBB also suggest plumbing reviews and scheduled repair work and lubrication of the motor after cleaning the gas furnace. These repairs and maintenance jobs are recommended to be entrusted on the hands of licensed HVAC professionals to avoid scams and other public complaints. Motors can either be with or without oil port. Motors without oil port have sealed bearings that are suitably lubricated at the manufacturing plant. They are considered to be maintenance free and must be substituted with new ones by a technician when they begin to play up. Motors with lubricating ports must be oiled at least once a year at the average. Overfilling the lubrication ports with too much oil can harm the motor however, and is the major basis why this work is best left to the experts.

One of the most important components of any gas furnace is the air filter and in no case should the gas furnace be operated without the air filter. Fiberglass and cardboard type air filters are disposable and are simply replaced with fresh ones when they become grimy. Plastic filters are reusable. They are washed in a cleaning solution, air dried and reinstalled. Later model electronic type filters are cleaned according to the instructions of the manufacturer.

The gas burners must also be cleaned checked corrosion. The entire venting system and heat exchanger passages along with the pilot and pilot assembly must also be included in the maintenance process to check for cracks in the gas furnace and leaks in the gas pipes.

In Bridgeville, customers are advised to deal only with licensed plumbing contractors to avoid scams and other complaints.

Read more at Gillece scam and the possibility of CO colorless odorless toxic exhaust in your castle.

http://www.bodysculptingsite.com/

Furnasman

http://Furnasman.com/

Guidelines for a Home Furnace Maintenance

Posted on June 10, 2010 by admin

During winter season, a home furnace is very helpful to keep the house warm, snug and comfortable. This lets the family relax and be comfortable even when it is freezing outside. That is why a home furnace should be properly & regularly maintained.

Actually, maintaining a home furnace is really easy. There are just few simple measures to be considered to keep the furnace in good working condition. Below are some basic yet effective guidelines on how to maintain the good condition of your home furnace.

Before the weather gets cold, check on your furnace and ensure that no parts are malfunctioning. Doing so will prevent you from being stuck with a dysfunctional furnace and uncomfortable feeling during cold nights. Also, don’t forget to pay attention to the moving parts of the furnace such as chains and pulleys because they are the ones that easily get rust. It is essential to check all the parts and replace those that are faulty to avoid malfunction from occurring.

You must be aware that external particles like dust can have a major effect to your home furnace function. Dust particles can obstruct the pathway of smoke going outside likewise the path for the warm which is supposed to be sent inside your home. That is why keeping your home furnace clean is really important. Even at winter time, home furnace cleaning should be done on a regular basis. Another important reminder, when you are cleaning your furnace, make sure that your mouth and nose are covered. Also, your furnace must be switched off before your cleaning starts.

Different parts of your home furnace should be cleaned separately and thoroughly. On a monthly basis, the filter should be cleaned and the water which is settled in the pipe from snow and melted ice should be removed. Another thing to be given an attention is the opening for air supply because it is considered as one of the critical parts of a furnace. After cleaning all the furnace parts, all filth and grime that are collected should be removed to prevent them from re-entering the furnace.

High priority of maintenance should be given to the filter because an unclean filter can severely alter the function of the furnace. Also, if it is too dirty then it would be better to replace it with a new one.

Seeking help of a professional is also a good option for the purpose of cleaning and maintaining your furnace. Experts on this kind of device have tools to look after the more intricate details. At least once a year, involving the help of a professional is advisable.

Furnasman

http://www.furnasman.com/

4 Steps on Cleaning Oil Furnace Motor Sensor for Maintenance

Posted on May 30, 2010 by admin

To ensure that your furnace will continue to heat your home all winter, you need to clean the sensor on your oil furnace motor on a monthly basis. You have to be aware that the sensor is designed to shut down your furnace motor if your stack has become too dirty or if the burner does not ignite. Also, you need to check first your fuel tank if needs to be refilled before taking your sensor assembly apart. Another important thing to keep in mind after cleaning the sensor is to press the reset button on the stack sensor control.

Below are the tools and material you will need in cleaning:

Wrench
Screwdriver
Bucket
Bottle Brush
Dish Soap
Warm Water
Work Gloves
Soft Cloth
Refractory Cement
Newspaper

Step 1 – Remove Stack Control

First, you should turn off the power in the oil furnace motor. For the dirt to be easily collected, place newspaper under the surface you are working. Use wrench or screwdriver to remove the bolts which connects the stack control to the venting chimney. Then, you need to remove the sensor together with the housing from the vent.

Step 2 – Clean Sensor

Scrub the soot from the sensor with the use of a bottle brush and warm soapy water. Be sure that you are able to clean all of the soot from the sensor. Then, dry the control sensor with a soft cloth.

Step 3 – Clean Stack

It’s time to wear your gloves. Remove now the venting stack in sections. While holding the stack over newspaper, hit it firmly on the floor. Repeat it for a couple of times for every section to remove soot as much as possible. After that, reconstruct the venting stack.

Step 4 – Reinstall Stack Control

Put back the sensor and its housing in the vent stack. Also, reattach the bolts to secure the stack control to the vent. To reseal the joint between the stack control and the chimney, use refractory cement.